Selecta Engineering · OEM manufacturer of medical and laboratory equipment
You have the idea. We design it and build it.
We are manufacturers of medical and laboratory equipment. Since 1946, for more than 80 years, we have been designing and building OEM equipment for major multinationals, taking care of the whole process: engineering, drawings, design, market research, feasibility, manufacturing and certification.
- 80+ years: building OEM equipment since 1946
- 2,800+ m²: of facilities to manufacture your equipment
- Multinationals: trust our engineering
- End-to-end: from idea to certified equipment
Specialists in every laboratory process.
We design and build equipment that centrifuges, heats, cools, shakes, mixes, sprays, sterilises, incubates, dries, dispenses, weighs, filters, ventilates, extracts, recovers, condenses, evaporates and quantifies, and controls pressure, vacuum, humidity, salinity, pH and conductivity, tailored to what your product and your market need.
- Centrifuge
- Heat
- Cool
- Shake
- Mix
- Spray
- Sterilise
- Incubate
- Dry
- Humidity
- Salinity
- Dispense
- Weigh
- pH
- Conductivity
- Filter
- Pressure
- Vacuum
- Ventilation
- Extraction
- Recovery
- Condensation
- Evaporation
- Quantification
Every machine we build runs on a custom PLC
Each machine is controlled by a PLC (programmable logic controller) programmed specifically for your process: recipes, alarms, data logging, HMI touchscreen and connection to your systems. We develop it in-house, together with the machine.
We take care of everything, from idea to equipment.
You can trust us with just the design, just the manufacturing, or the entire process.
Market research
We analyse your market and what your product needs.
Feasibility
We validate the idea technically and financially before we start.
Engineering and drawings
We develop the engineering and technical drawings of the equipment.
Design and prototype
We design the equipment and build the prototype.
Certification
We obtain CE and FDA / GMP certification so you can sell worldwide.
Manufacturing
We manufacture it in series, under your own brand.
Start wherever you need
Just have the idea?
We run the whole process: study, engineering, prototype, certification and manufacturing.
Already have the design?
We certify it (CE, FDA / GMP) and manufacture it in series under your brand.
Already designed and certified?
We just manufacture it. Send us the drawings and we take care of production.
Experts where the bar is highest.
Medical device
Experience in medical and diagnostic equipment developed for major international manufacturers.
ATEX zones for dust
Equipment for atmospheres with a risk of dust explosion, such as our ATEX heating and cooling ovens.
ATEX zones for gas
Design and manufacture of equipment suitable for classified zones where gases are present.
CE and FDA / GMP certification
We obtain CE marking and FDA / GMP certification for your equipment so you can sell it in every market worldwide.
See projects: ATEX ovens, centrifuges, autoclaves and custom equipment.
Tell us your idea
Even if it is just a sketch or a need. We will send you a clear proposal covering feasibility, cost and lead times to design it, build it, or both.